About
This is still an early stage of the project. Its usable but it still has no proper build system up. I use it daily as it is, but I do hope I can make it something more accessible in this learning adventure.
TODO
- Submit the profile of the HZ-8360 thermal printer to the escpos-printer-db project (I still need to properly configure the printer with its full features)
- Add a build system
- ...
Usage
Configuration
Configure your config.yaml in the src directory:
use: "socket"
socket:
host: "<printer-ip>"
port: "<printer-port>"
usb:
path: "<printer-usb-device>"
encoding:
capabilities-file: ./capabilities.json
About the capabilities.json file
For this, I decided to use the escpos-printer-db project already available on GitHub. It's a project where one can configure its thermal printer and then use a script to collate its code pages data.
I have copied the profile for my printer into this repo HZ-8360.yml, if you
have a different thermal printer you should check the original repo for
something compatible and if there isn't, write your own based on other profiles.
Copy the capabilities.json file you generated into the src directory of this
project.
How to find the printer
On my specific printer:
- turn off
- hold the feed button
- turn it on
- hold the feed button until the lights blink red
- release button
- test page will print with network settings
Running it
Go to the src directory and try it with:
$ echo "Something, something" | go run .
Relevant links
https://github.com/receipt-print-hq/escpos-printer-db https://download4.epson.biz/sec_pubs/pos/reference_en/escpos/dle_eot.html https://download4.epson.biz/sec_pubs/pos/reference_en/escpos/commands.html
https://en.wikipedia.org/wiki/Code_page_860 https://en.wikipedia.org/wiki/Windows-1258